China Short Production Time Harmonic Drive Technologies Hst Harmonic Reducer Gearbox for Servo System agricultural gearbox repairs

Item Description

Item Description:

1. Flexspline is a hollow flanging normal cylinder composition.

two. There is a large-diameter hollow shaft gap in the middle of the cam of the wave generator. The internal layout of the reducer has a help bearing.

3. It has a fully sealed framework and is easy to install. It is very ideal for events in which the wire requirements to be threaded from the centre of the reducer.
 

Advantages:
one. High precision,substantial torque
2. Committed technological personnel can be on-the-go to provide layout answers
three. Manufacturing facility direct income fine workmanship sturdy high quality assurance
four. Solution high quality troubles have a one-yr warranty time, can be returned for substitute or repair

Business profile:

 

HangZhou CZPT Technologies Co., Ltd. recognized in 2014, is committed to the R & D plant of higher-precision transmission factors. At existing, the once-a-year creation capacity can attain 45000 sets of harmonic reducers. We firmly feel in top quality 1st. All backlinks from uncooked materials to finished goods are strictly supervised and managed, which offers a reliable foundation for item quality. Our goods are bought all more than the country and overseas.

The harmonic reducer and other higher-precision transmission factors ended up independently developed by the business. Our organization spends 20% of its revenue each 12 months on the analysis and growth of new technologies in the sector. There are 5 people in R & D.

Our benefit is as beneath:

1.7 several years of advertising and marketing expertise

2. 5-man or woman R & D crew to provide you with complex assist

3. It is marketed at house and abroad and exported to Turkey and Eire

4. The item quality is guaranteed with a one-yr warranty

five. Goods can be custom-made

Strength factory:

Our plant has an total campus The variety of workshops is close to 300 No matter whether it truly is from the creation of raw components and the procurement of uncooked supplies to the inspection of finished items, we’re carrying out it ourselves. There is a total creation technique

HST-III Parameter:

Model Speed ratio Enter the rated torque at 2000r/min Allowed CZPT torque at commence stop The allowable maximum of the common load torque Maximum torque is authorized in an instantaneous Permit the maximum pace to be entered Regular input pace is permitted Back gap design existence
NM kgfm NM kgfm NM kgfm NM kgfm r / min r / min Arc sec Hour
14 fifty 6.2 .six twenty.seven 2.1 seven.nine .seven forty.3 4.one 7000 3000 ≤30 10000
80 9 .9 27 2.seven 12.seven 1.3 54.1 five.five
100 nine .9 32 three.3 twelve.seven 1.three 62.one six.3
17 50 eighteen.4 1.9 39 four 29.nine 3 80.5 eight.two 6500 3000 ≤30 15000
eighty 25.3 two.six 49.5 five 31 3.two one hundred.1 10.2
one hundred 27.six 2.eight 62 six.three 45 four.six 124.two twelve.7
20 fifty 28.8 two.nine 64.four 6.6 39 four 112.7 11.5 5600 3000 ≤30 15000
eighty 39.one four 85 eight.eight fifty four 5.5 146.one 14.9
100 46 four.seven 94.3 nine.six 56 five.eight 169.1 17.2
one hundred twenty forty six 4.7 100 10.2 fifty six five.eight 169.1 seventeen.two
a hundred and sixty forty six 4.seven a hundred ten.two fifty six five.eight 169.1 seventeen.2
25 50 44.nine four.6 113 11.five 63 six.5 213.nine 21.8 4800 3000 ≤30 15000
eighty seventy two.five 7.four 158 16.1 one hundred ten.two 293.3 29.nine
a hundred 77.one seven.nine 181 eighteen.4 124 twelve.seven 326.6 33.three
one hundred twenty seventy seven.one seven.nine 192 19.6 124 12.seven 349.6 35.6
32 fifty 87.four 8.9 248 twenty five.three 124 12.seven 439 forty four.eight 4000 3000 ≤30 15000
80 135.seven thirteen.8 350 35.6 192 19.6 653 66.6
100 157.six sixteen.1 383 39.1 248 25.3 744 seventy five.nine
40 100 308 37.two 660 67 432 forty four 1232 126.7 4000 3000 ≤30 15000

HSG Parameter:

Model Speed ratio Enter the rated torque at 2000r/min Allowed CZPT torque at begin stop The allowable optimum of the typical load torque Maximum torque is permitted in an immediate Enable the optimum speed to be entered Common input pace is allowed Back gap layout daily life
NM kgfm NM kgfm NM kgfm NM kgfm r / min r / min Arc sec Hour
14 fifty 7 .seven 23 two.3 9 .9 forty six 4.7 14000 8500 ≤20 15000
80 10 one 30 three.1 14 one.four 61 six.two
one hundred 10 one 36 three.seven fourteen 1.4 70 seven.2
17 50 21 two.one 44 4.five 34 3.four ninety one 9 10000 7300 ≤20 20000
eighty 29 2.9 fifty six 5.7 35 3.six 113 12
100 31 three.two 70 seven.two fifty one five.2 143 15
20 fifty 33 3.three 73 7.four forty four four.5 127 13 10000 6500 ≤20 20000
eighty 44 four.five 96 nine.8 61 six.2 a hundred sixty five 17
a hundred 52 five.three 107 ten.nine 64 6.5 191 twenty
a hundred and twenty 52 5.three 113 11.5 64 6.5 191 20
160 fifty two five.three one hundred twenty twelve.2 64 6.five 191 twenty
25 50 51 5.2 127 13 72 7.3 242 twenty five 7500 5600 ≤20 20000
80 eighty two eight.four 178 18 113 twelve 332 34
one hundred 87 8.nine 204 21 a hundred and forty fourteen 369 38
120 87 8.9 217 22 one hundred forty 14 395 40
32 50 ninety nine 10 281 29 140 14 497 fifty one 7000 4800 ≤20 20000
80 153 sixteen 395 40 217 22 738 75
one hundred 178 eighteen 433 forty four 281 29 841 86
forty one hundred 345 35 738 75 484 49 1400 143 5600 4000 ≤20 20000

Exhibitions:
Application case:

FQA:
Q: What should I offer when I choose a gearbox/velocity reducer?
A: The ideal way is to provide the motor drawing with parameters. Our engineer will check and suggest the most appropriate gearbox product for your reference.
Or you can also give the beneath specification as effectively:
1) Sort, product, and torque.
two) Ratio or output velocity
three) Operating issue and connection approach
4) Good quality and mounted equipment name
five) Enter mode and input speed
six) Motor brand product or flange and motor shaft dimensions

US $290-500
/ Piece
|
1 Piece

(Min. Order)

###

Application: Motor, Machinery, Agricultural Machinery, Hst-I
Hardness: Hardened Tooth Surface
Installation: 90 Degree
Layout: Coaxial
Gear Shape: Cylindrical Gear
Step: Single-Step

###

Samples:
US$ 100/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Model Speed ratio Enter the rated torque at 2000r/min Allowed peak torque at start stop The allowable maximum of the average load torque Maximum torque is allowed in an instant Allow the maximum speed to be entered Average input speed is allowed Back gap design life
NM kgfm NM kgfm NM kgfm NM kgfm r / min r / min Arc sec Hour
14 50 6.2 0.6 20.7 2.1 7.9 0.7 40.3 4.1 7000 3000 ≤30 10000
80 9 0.9 27 2.7 12.7 1.3 54.1 5.5
100 9 0.9 32 3.3 12.7 1.3 62.1 6.3
17 50 18.4 1.9 39 4 29.9 3 80.5 8.2 6500 3000 ≤30 15000
80 25.3 2.6 49.5 5 31 3.2 100.1 10.2
100 27.6 2.8 62 6.3 45 4.6 124.2 12.7
20 50 28.8 2.9 64.4 6.6 39 4 112.7 11.5 5600 3000 ≤30 15000
80 39.1 4 85 8.8 54 5.5 146.1 14.9
100 46 4.7 94.3 9.6 56 5.8 169.1 17.2
120 46 4.7 100 10.2 56 5.8 169.1 17.2
160 46 4.7 100 10.2 56 5.8 169.1 17.2
25 50 44.9 4.6 113 11.5 63 6.5 213.9 21.8 4800 3000 ≤30 15000
80 72.5 7.4 158 16.1 100 10.2 293.3 29.9
100 77.1 7.9 181 18.4 124 12.7 326.6 33.3
120 77.1 7.9 192 19.6 124 12.7 349.6 35.6
32 50 87.4 8.9 248 25.3 124 12.7 439 44.8 4000 3000 ≤30 15000
80 135.7 13.8 350 35.6 192 19.6 653 66.6
100 157.6 16.1 383 39.1 248 25.3 744 75.9
40 100 308 37.2 660 67 432 44 1232 126.7 4000 3000 ≤30 15000

###

Model Speed ratio Enter the rated torque at 2000r/min Allowed peak torque at start stop The allowable maximum of the average load torque Maximum torque is allowed in an instant Allow the maximum speed to be entered Average input speed is allowed Back gap design life
NM kgfm NM kgfm NM kgfm NM kgfm r / min r / min Arc sec Hour
14 50 7 0.7 23 2.3 9 0.9 46 4.7 14000 8500 ≤20 15000
80 10 1 30 3.1 14 1.4 61 6.2
100 10 1 36 3.7 14 1.4 70 7.2
17 50 21 2.1 44 4.5 34 3.4 91 9 10000 7300 ≤20 20000
80 29 2.9 56 5.7 35 3.6 113 12
100 31 3.2 70 7.2 51 5.2 143 15
20 50 33 3.3 73 7.4 44 4.5 127 13 10000 6500 ≤20 20000
80 44 4.5 96 9.8 61 6.2 165 17
100 52 5.3 107 10.9 64 6.5 191 20
120 52 5.3 113 11.5 64 6.5 191 20
160 52 5.3 120 12.2 64 6.5 191 20
25 50 51 5.2 127 13 72 7.3 242 25 7500 5600 ≤20 20000
80 82 8.4 178 18 113 12 332 34
100 87 8.9 204 21 140 14 369 38
120 87 8.9 217 22 140 14 395 40
32 50 99 10 281 29 140 14 497 51 7000 4800 ≤20 20000
80 153 16 395 40 217 22 738 75
100 178 18 433 44 281 29 841 86
40 100 345 35 738 75 484 49 1400 143 5600 4000 ≤20 20000
US $290-500
/ Piece
|
1 Piece

(Min. Order)

###

Application: Motor, Machinery, Agricultural Machinery, Hst-I
Hardness: Hardened Tooth Surface
Installation: 90 Degree
Layout: Coaxial
Gear Shape: Cylindrical Gear
Step: Single-Step

###

Samples:
US$ 100/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Model Speed ratio Enter the rated torque at 2000r/min Allowed peak torque at start stop The allowable maximum of the average load torque Maximum torque is allowed in an instant Allow the maximum speed to be entered Average input speed is allowed Back gap design life
NM kgfm NM kgfm NM kgfm NM kgfm r / min r / min Arc sec Hour
14 50 6.2 0.6 20.7 2.1 7.9 0.7 40.3 4.1 7000 3000 ≤30 10000
80 9 0.9 27 2.7 12.7 1.3 54.1 5.5
100 9 0.9 32 3.3 12.7 1.3 62.1 6.3
17 50 18.4 1.9 39 4 29.9 3 80.5 8.2 6500 3000 ≤30 15000
80 25.3 2.6 49.5 5 31 3.2 100.1 10.2
100 27.6 2.8 62 6.3 45 4.6 124.2 12.7
20 50 28.8 2.9 64.4 6.6 39 4 112.7 11.5 5600 3000 ≤30 15000
80 39.1 4 85 8.8 54 5.5 146.1 14.9
100 46 4.7 94.3 9.6 56 5.8 169.1 17.2
120 46 4.7 100 10.2 56 5.8 169.1 17.2
160 46 4.7 100 10.2 56 5.8 169.1 17.2
25 50 44.9 4.6 113 11.5 63 6.5 213.9 21.8 4800 3000 ≤30 15000
80 72.5 7.4 158 16.1 100 10.2 293.3 29.9
100 77.1 7.9 181 18.4 124 12.7 326.6 33.3
120 77.1 7.9 192 19.6 124 12.7 349.6 35.6
32 50 87.4 8.9 248 25.3 124 12.7 439 44.8 4000 3000 ≤30 15000
80 135.7 13.8 350 35.6 192 19.6 653 66.6
100 157.6 16.1 383 39.1 248 25.3 744 75.9
40 100 308 37.2 660 67 432 44 1232 126.7 4000 3000 ≤30 15000

###

Model Speed ratio Enter the rated torque at 2000r/min Allowed peak torque at start stop The allowable maximum of the average load torque Maximum torque is allowed in an instant Allow the maximum speed to be entered Average input speed is allowed Back gap design life
NM kgfm NM kgfm NM kgfm NM kgfm r / min r / min Arc sec Hour
14 50 7 0.7 23 2.3 9 0.9 46 4.7 14000 8500 ≤20 15000
80 10 1 30 3.1 14 1.4 61 6.2
100 10 1 36 3.7 14 1.4 70 7.2
17 50 21 2.1 44 4.5 34 3.4 91 9 10000 7300 ≤20 20000
80 29 2.9 56 5.7 35 3.6 113 12
100 31 3.2 70 7.2 51 5.2 143 15
20 50 33 3.3 73 7.4 44 4.5 127 13 10000 6500 ≤20 20000
80 44 4.5 96 9.8 61 6.2 165 17
100 52 5.3 107 10.9 64 6.5 191 20
120 52 5.3 113 11.5 64 6.5 191 20
160 52 5.3 120 12.2 64 6.5 191 20
25 50 51 5.2 127 13 72 7.3 242 25 7500 5600 ≤20 20000
80 82 8.4 178 18 113 12 332 34
100 87 8.9 204 21 140 14 369 38
120 87 8.9 217 22 140 14 395 40
32 50 99 10 281 29 140 14 497 51 7000 4800 ≤20 20000
80 153 16 395 40 217 22 738 75
100 178 18 433 44 281 29 841 86
40 100 345 35 738 75 484 49 1400 143 5600 4000 ≤20 20000

Tips For Selecting the Right Agricultural Gearbox

An agricultural gearbox is an essential component of a farm machinery, such as a combine harvester. A high-efficiency gearbox ensures optimum performance, while readily available replacement parts ensure a hassle-free operation. Here are some important tips for selecting the right agricultural gearbox. You can also read about bevel and CZPT gearboxes, Closed-loop seals, and the quality of materials. You can choose from the many different brands and models available.
agriculturalparts

Bevel gearboxes

A bevel gearbox consists of a series of enclosed spiral and straight bevels that transmit rotational power through a 90-degree shaft. These gearboxes can be configured at many different angles to suit various agricultural machinery applications. For example, CZPT Gearboxes manufactures a bevel gear drive at 68 degrees that is perfect for grain cart and auger applications. It also has a 50-degree model for the same purpose.
The simplest type of bevel gearbox uses straight or helical teeth. Straight teeth make it difficult to realize small profile coverage. The ratio between the input and output shafts is generally 1:1. Bevel gearboxes with straight teeth cannot produce a high transmittable torque and are also relatively noisy. A bevel gearbox with a straight or bevelled output shaft can also be symmetrical or asymmetrical, depending on the application.
A bevel gearbox can be arranged in several ways. It can be configured to provide deflection in two or three directions. The output shafts can be at various angles: 90 degrees, 120 degrees, and 135 degrees. Depending on the size and mounting location, it can be geared for either a simple screw drive or a double-shaft arrangement. One option that is not often used is a double-helix bevel gearbox, which is typically less than half the size of a standard gearbox.
In addition to bevel gears, there are also hypoid bevel gears and spiral gears. Both types produce thrust forces that act parallel to the axis of rotation, but the spiral bevel gear produces more thrust force and a change in direction of the torque is possible. However, both types of bevel gears have their drawbacks. In order to make sure that you are choosing the best one for your needs, it’s important to choose the right one.
Agricultural machinery use bevel gears to elevate the crop. The housings of these gearboxes are usually made of closed-grain cast-iron, although larger sizes are made of SG 500/7 material. The screw, meanwhile, is made of Cr-Mo medium carbon steel that has high core strength. The nut is made of aluminum bronze and the tapered roller bearing is suitable for high-axial and radial loads.

CZPT gearboxes

If you’re a farmer, you probably know just how important the parts of your CZPT agricultural gearbox are. If the gears on your tractor start to wear out, you’ll be losing significant yields, since they’re inefficient. And if they don’t have a high gear ratio, that means higher frictional losses, which means lower quality harvests. Food industry gearboxes must meet hygiene and safety regulations as well as withstand harsh environmental conditions. Additionally, you’ll find that the machinery in your food processing plant uses food-safe coloring agents and oils.
Despite the many challenges that face gearboxes, they’re essential for efficient cropping operations. Because they’re used in almost every stage of the cropping cycle, you’ll want them to be efficient and resilient to the toughest conditions. Those conditions include high and low temperatures, operation in moist or arid environments, and safety regulations. But there are some solutions that can help you maintain your cropping cycles for longer, and avoid the need to purchase expensive, replacement gearboxes from a third-party supplier.
CZPT shaft-mount reducers, designed for beet trucks, power conveyors, and other applications, use helical gearing with hardened steel and Viton seals to resist corrosion. CZPT Ultramite gearmotors, for example, drive pilers, stacker boom swings, and hoists. These high-quality gearmotors feature a low-speed direct drive and a high-speed pinion. And all of these products can accept standard NEMA C-face motors.
Industrial gearboxes are becoming increasingly essential for power transfer applications. From automobiles to helicopters to marine vessels, industrial gearboxes provide energy efficiency and reliability for businesses. With their torque multiplication, they reduce the speed of tasks and decrease their carbon footprints. In fact, many industries today are using industrial gearboxes to improve their efficiency, reduce costs, and increase productivity. This makes these gearboxes more than just useful in the agricultural sector.
agriculturalparts

Closed-loop seals

The closed-loop seal is one of the best ways to keep the gearbox safe from water intrusion. It’s a great alternative to desiccant breathers. Although they can’t keep the gearbox underwater, they are a great option for agricultural gearboxes. In the event of an emergency, a closed-loop elastomeric seal will prevent water from leaking into the gearbox.
When it comes to agriculture, the gearbox is important to the entire food chain. Even a little downtime can mean significant production loss. This is why it’s crucial to choose a gearbox that’s easy to access and maintain. Luckily, there are some great agricultural gearbox manufacturers that make closed-loop seals that are easy to access and maintain. A quality gearbox will last for a long time and keep your production costs down.
Flange gaskets are a vital component in the gearbox flange joint. When exposed to high compressive loads over time, gaskets start failing. As a result, they lose strength and leak. Due to their importance, gasket deformation plays a significant role in sealing performance. Therefore, a detailed analysis is carried out to study how gasket thickness affects deformation and von Mises stresses.
End covers are another common agricultural gearbox component. These are a type of seal that fits into the housing bore of rotary shaft lip seals. The DMR(tm) Wheel Hub Seal protects the bearings and shafts during installation and removal. These seals are made of elastomer/sheet metal. They are excellent in high-speed, high-pressure and chemical compatibility applications.
The type of motor mounted in the gearbox also determines the longevity of the seal. A C-face motor, for example, is mounted in a gearbox with a C-face motor. The shaft must slide into the hollow bore of the gearbox without wiggle. Otherwise, the motor may cause deformation of the seal, leading to leakage. Therefore, it is important to know the specific mounting arrangement of the motor before installing a C-face motor.
Various types of rotary seals are available for tractors. Among them, CZPT V-Class Magnum Seal has a grease-filled cavity outboard of the lip seal. This cavity traps small contaminants and blocks them from reaching the lip seal. In addition, the zerk on the grease cavity ensures that the lubrication reaches the outer dust lip, reducing heat generation.
agriculturalparts

Quality of materials

A quality agricultural gearbox can make or break a farming project. A good quality gearbox is not only reliable but also sturdy and will last a long time. In addition, it can save you money. Agricultural gearboxes come in different styles to fit a wide variety of applications. If you’re looking for a high-quality gearbox that will last a long time, consider an Aline Trading P/L gearbox. Aline Trading gearboxes can handle a variety of tasks, from harvesting crops to operating agricultural machinery. They are designed to reduce input shaft speed and increase the tractor PTO speed. A 50-degree bevel gear drive is commonly used on a grain cart or a portable grain elevator.
A tractor’s gear box is made of grey cast iron. This material is machinability-friendly, wear-resistant, and vibration-dampening. The belt pulleys are usually cast iron and use two-stage processes, casting and forging. Large belt pulleys are typically made of cast iron. The brake drums’ material needs to be higher-quality to reduce vibrations. The brake drums are made of grey iron ASTM A48 Class 35.
Agricultural gearboxes play a vital role in the entire food chain. They’re an essential part of the agricultural equipment production process, and efficient gearboxes are crucial for profitable operations. In addition to being highly efficient, agricultural gearboxes need to be able to endure a variety of environmental conditions. High and low temperature extremes, operations in moist and arid environments, and safety regulations are just some of the problems that agricultural gearboxes face.
China Short Production Time Harmonic Drive Technologies Hst Harmonic Reducer Gearbox for Servo System     agricultural gearbox repairs		China Short Production Time Harmonic Drive Technologies Hst Harmonic Reducer Gearbox for Servo System     agricultural gearbox repairs
editor by czh 2022-12-17