Product Description
Basic Info.
| Model | 1204 Wheel Tractor | |
| Drive Type | 4WD/2WD | |
| Overall MachineDimensions(length*width*height and location) | mm | 4200*1760*2700 |
| Wheelbase | mm | 2100 |
| commonly used wheel tracks | mm | 1400 |
| wheel distance(front wheel/rear wheel) | mm | 1300-1600(adjustable) |
| Minimum ground clearance and location | mm | 460(bottom of front axle) |
| rear axle | / | TB aggravation large bridge(12+12) |
| standard weight(front/rear) | kg | 144/400 |
| number of gears(forward/reverse) | / | 12+12 shuttle side gear |
| Maximum design theoretical speed | km/h | 48 |
| Engine and main clutch connection method | / | direct |
| type of rollover protection device(cab or safety frame) | / | security framework |
| Engine structure type | / | In-line,direct injection,water-cooled,four-stroke |
| engine manufacturer | / | HangZhou 120 Hp |
| engine air intake method | / | turbocharging |
| number of engine cylinders | / | 4 |
| engine standard power | kw | 88.2 |
| engine standard speed | r/min | 2400 |
| engine cooling method | / | water cooling |
| steering system type | / | fully hydraulic |
| steering system steering control mechanism | / | steering wheel |
| steering system steering mechanism type | / | front wheel steering |
| tyre model | front wheel:9.5-24 rear wheel:14.9-30 | |
| Suspension device type | / | Rear three-point suspension |
| number of hydraulic output groups | / | three |
| working device safety valve full opening pressure | MPa | 17.5-18.0 |
| number of splinesof PTO shaft | / | 6 |
| PTO shaft standard speed | R/min | 540/760 |
Product Parameters
1204 TRACTOR
Tractor A self-propelled engine used to pull and drive work machinery to complete various mobile operations. Can also do fixed work power. It is composed of engine, transmission, walking, steering, hydraulic suspension, power output, electrical instruments, driving control and traction systems or devices.
The engine power is transmitted from the transmission system to the driving wheel to make the tractor run. In real life, it is common to use the rubber belt as the medium of power transmission. Agricultural, industrial and special purpose tractors according to function and use; According to the structure type of wheel, crawler, boat tractor and self-propelled chassis.
Features
1.It is equipped with famous and excellent engines, with large torque reserve, strong power and low fuel consumption.
2.Full hydraulic steering system, flexible and light to operate.
3.Middle shift gear, easy to operate.
4.8+2 gear shift, reasonable speed matching, high working efficiency and strong adaptability.
5.The new miniature LCD instrument is developed according to the harsh working conditions of construction machinery and has high reliability.
REAL SCENE SHOOTING
Although the tractor is a more complex machine, its type and size are different, but they are composed of 3 parts of the engine, chassis and electrical equipment, each of which is indispensable.
Tractor engine
It is the device that generates the power of the tractor, and its role is to convert the heat energy of the fuel into mechanical energy to output power. Most of the farm tractors produced use diesel engines.
Tractor chassis
It is the device that transmits power to the tractor. Its role is to transfer the power of the engine to the driving wheel and the working device to make the tractor travel, and to complete the mobile operation or fixed role. This function is achieved through the mutual cooperation and coordination of the transmission system, walking system, steering system, braking system and working device, and at the same time, they constitute the skeleton and body of the tractor. Therefore, we refer to the above 4 systems and 1 device as chassis. That is to say, in the whole of the tractor, all other systems and devices other than the engine and electrical equipment are collectively referred to as the tractor chassis.
Tractor electrical equipment
It is a device to ensure that the tractor uses electricity. Its role is to solve lighting, safety signals and engine starting.
Company Profile
HangZhou Qingcha Machinery Manufacturing Co., Ltd. is located in the ash high-tech park of Xihu (West Lake) Dis. Town, HangZhou City,HangZhou. It has been committed to the research and development and production of internal combustion counterbalanced forklifts, battery counterbalanced forklifts, OMV intelligent omnidirectional forklifts,wheel loader,mini dumper,mixer,backhoe loader,excavator ,tractor and mini digger.
Since its inception, the company has always been to build China’s most cost-effective high-quality construction machinery for the purpose of continuous research and development and innovation, the company has large CNC cutting machine, vertical machining center, horizontal gantry milling machine and other equipment more than 40 sets, to achieve all the key components Self-made, providing a strong guarantee for the quality of the product.
For the long-term development of the company, the company regards the quality as the life of the company, establishes a perfect quality assurance system, and has passed the IS09001 international quality system certification.
In the near future, HangZhou Forklift will become 1 of the CHINAMFG R&D, production and export construction machinery bases in the industry, contributing to the prosperity of the domestic and international logistics market and the promotion of innovation and development in the construction machinery industry.
| Type: | Wheel Tractor |
|---|---|
| Usage: | Farm Tractor, Garden Tractor, Lawn Tractor |
| Certification: | ISO, CE |
.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}
| Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
|
Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Proper Installation and Alignment of Miter Gearboxes
Installing and aligning a miter gearbox correctly is essential to ensure its optimal performance and longevity. Follow these steps to achieve proper installation and alignment:
- Preparation: Gather all necessary tools and equipment for the installation, including mounting hardware, shims, and alignment tools.
- Mounting Surface: Ensure that the mounting surface is clean, flat, and free from any debris or contaminants that could affect the gearbox’s alignment and operation.
- Alignment Tools: Use precision alignment tools, such as dial indicators or laser alignment systems, to accurately measure and adjust the alignment of the gearbox and its input and output shafts.
- Check for Parallelism: Align the input and output shafts of the gearbox to be parallel to each other and perpendicular to the mounting surface. This step is crucial to prevent misalignment-induced wear and reduce backlash.
- Adjustment: Use shims or other adjustable components to fine-tune the alignment. Make incremental adjustments while continuously checking the alignment with the chosen alignment tools.
- Bearing Loads: Ensure that the bearings supporting the gearbox shafts are properly lubricated and preloaded according to the manufacturer’s recommendations. Proper bearing preload helps maintain alignment and reduces wear.
- Tightening Bolts: Tighten the mounting bolts gradually and evenly to avoid introducing additional misalignment during the installation process.
- Runout and Clearance: Check for any runout or clearance issues during rotation by turning the input shaft. If there is any binding, interference, or abnormal noise, investigate and address the cause before finalizing the installation.
- Final Checks: Double-check the alignment using the alignment tools and ensure that the gearbox operates smoothly without any unusual vibrations, noises, or resistance.
- Documentation: Keep a record of the alignment measurements and adjustments made during the installation process. This documentation can be valuable for future reference and maintenance.
Proper installation and alignment of miter gearboxes help optimize their performance, minimize wear and tear, and contribute to the overall efficiency and reliability of the mechanical system in which they are used.
Minimizing Backlash and Ensuring Accurate Motion Transfer in Miter Gearboxes
Miter gearboxes are meticulously designed to minimize backlash and ensure precise and accurate motion transfer between the input and output shafts. Backlash refers to the slight movement or play between the gear teeth when the direction of rotation is changed. Minimizing backlash is essential for maintaining positional accuracy, reducing vibration, and achieving smooth motion in mechanical systems.
Several design features and engineering considerations contribute to minimizing backlash in miter gearboxes:
- High-Quality Gearing: Miter gearboxes use high-quality bevel gears with precisely machined teeth and tight manufacturing tolerances. This ensures a snug fit between the gear teeth, reducing the potential for any free movement or play.
- Preload and Gear Mesh Arrangement: Engineers carefully calculate and implement gear preloading, which involves applying a slight force between the gear mesh. This eliminates any clearance between the gear teeth, effectively reducing backlash.
- Bearing Arrangement: Proper bearing selection and arrangement play a critical role in minimizing backlash. High-quality bearings with minimal axial play are chosen to support the gear shafts and maintain precise alignment.
- Housing and Casing Rigidity: The gearbox housing is designed to provide optimal rigidity and support to the internal components. This helps prevent deflection or deformation that could contribute to backlash.
- Lubrication: Adequate lubrication is essential to reduce friction and wear between the gear teeth. Proper lubrication helps maintain the gear mesh and minimizes any irregular movement.
By incorporating these design principles and techniques, miter gearboxes are able to achieve accurate motion transfer with minimal backlash. This is particularly important in applications where precision positioning, synchronization, and reliable motion control are critical, such as robotics, CNC machinery, and automation systems.
Handling High-Speed and Heavy-Load Applications in Miter Gearboxes
Miter gearboxes are versatile mechanical components that can handle a wide range of applications, including both high-speed and heavy-load scenarios. The suitability of a miter gearbox for a specific application depends on various factors, including design, material, lubrication, and overall engineering considerations.
When it comes to high-speed applications, miter gearboxes can be designed and manufactured to handle rotational speeds that are typical in various industries. Properly designed miter gearboxes will consider factors such as gear tooth profile, lubrication, and material selection to minimize friction, heat generation, and wear, allowing for efficient and reliable operation at high speeds.
Similarly, miter gearboxes can also be engineered to handle heavy-load applications. By using durable materials, precision machining, and robust bearing arrangements, miter gearboxes can efficiently transmit high levels of torque while maintaining structural integrity. The bevel gear arrangement in miter gearboxes is well-suited for distributing heavy loads evenly across the gear teeth, ensuring smooth and consistent power transmission.
It’s important to note that the specific design and capabilities of a miter gearbox will vary depending on the manufacturer and the intended application. Engineers and designers work to optimize gear ratios, bearing arrangements, and housing materials to ensure that the miter gearbox can handle the demands of the given application, whether it involves high speeds, heavy loads, or a combination of both.
Ultimately, miter gearboxes can provide reliable performance across a wide spectrum of operating conditions, making them a versatile choice for various industries and applications.
editor by CX 2023-11-30