Product Description
Product Description
hole output spur gear mechanical speed variator Planetary Speed Reducer small gearbox price
HangZhou Fubao Electromechanical Technology Co., Ltd. mechanical speed variator Planetary Speed Reducer small gearbox is a new generation of practical products independently developed by our company:
Low noise: less than 65db.
Low back clearance: up to 3 arc minutes in a CHINAMFG and 5 arc minutes in a double stage.
High torque: higher than the standard planetary reducer torque.
High stability: high strength alloy steel, the whole gear after hardening treatment, not only the surface hard substitution.
High deceleration ratio: Modular design, planetary gearbox can be interlinked.
mechanical speed variator Planetary Speed Reducer small gearbox characteristic:
1.Planetary reducer manufacturer-Fubao Electromechanical Technology adopts an integrated planetary carrier and output shaft, which can provide better torsional rigidity. After precision machining, the gear set is not easy to eccentric, which can reduce interference, reduce wear and noise, and at the same time use a large The bearings are arranged with a wide span to distribute the load of the bearings, and once again strengthen the torque rigidity and radial load capacity of the mechanical speed variator Planetary Speed Reducer small gearbox. The output cover is made of aluminum alloy, which provides better heat dissipation capability for the product, so that the reducer produced by Fubao Electromechanical Technology can play an excellent role in the field of mechanical tools.
2.The planetary gear set is specially made of alloy steel. First, it undergoes quenching and tempering heat treatment to make the material hardness reach HRC30 degrees, and then undergoes nitriding surface treatment to HV860, so that the product has the characteristics of high surface hardness and high toughness in the center, and achieves the best product strength and service life. optimization.
3.The input shaft and the motor output shaft are connected by a bolted structure, with a round shaft seal design, and through dynamic balance analysis, it can ensure that there is no eccentric load at high speeds. After reducing unnecessary radial force, it can effectively Reduce the load on the motor side.
4.The material of the input cover/motor connection seat is made of aluminum alloy, which can provide better heat dissipation effect, and then provide good concentricity and verticality through professional lathe processing, so that the product can be stably combined with various motors, reducing the damage caused by insufficient precision. Unnecessary axial radial force makes the product have a longer life cycle.
Compared with other reduction machines, mechanical speed variator Planetary Speed Reducer small gearbox machines have high rigidity, high precision (single stage can be achieved within 1 point), high transmission efficiency (single stage in 97-98%), high torque/volume ratio, lifetime maintenance free and other characteristics.
Because of these characteristics,mechanical speed variator Planetary Speed Reducer small gearbox is mostly installed on the stepper motor and servo motor, used to reduce speed, increase torque, matching inertia.
Product Parameters
| WGK series parameters | Model number | WGK060 | WGK085 | WGK115 | WGK160 |
| Rated output torque | 12~40Nm | 40~135Nm | 90~335Nm | 270~900Nm | |
| Reduction ratio | L1:3,4,5,7,8,10 L2:12,16,20,25,28,32,35,40,56,64,70 L3:80,100,125,140,160,175,200,250,280,320,350,500,512,700,1000 |
||||
| Planetary gear backlash | L1:8arc.min L2:10arc.min L3:12arc.min | ||||
Detailed Photos
Product Details
Other products
Company Profile
HangZhou Fubao Electromechanical Technology Co., Ltd. was established in 2008, the company has a complete precision reducer design, production capacity. Set R & D, manufacturing, assembly and sales, more in the field of gear manufacturing has more than 10 years of background, in the manufacturing equipment is equipped with Switzerland Riesenhahl gear grinding machine, domestic Qinchuan gear grinding machine, hamai gear hobbing machine and domestic Xihu (West Lake) Dis. gear hobbing machine, Japan Yasaki TLGmazak CNC lathe, CNC milling machine and other fully CNC equipment, In addition, it is equipped with other advanced measuring equipment such as Japanese TTI gear detector, 3 coordinate measurement, reducer backlash measurement instrument and so on. In a strong manufacturing capacity at the same time, can be stable, continuous manufacturing of high-quality precision reducer products.
The precision reducer produced by our company has the characteristics of high structural rigidity, small back backlash, precise transmission and so on. It is widely used in various industries. Companies adhering to the concept of let customers participate in manufacturing, and strive to provide customers with more personalized services. In the field of precision transmission has a unique achievements. It is our CHINAMFG pursuit to make far-reaching contributions.
Factory Display
FAQ
Q: Speed reducer grease replacement time
A: When sealing appropriate amount of grease and running reducer, the standard replacement time is 20000 hours according to the aging condition of the grease. In addition, when the grease is stained or used in the surrounding temperature condition (above 40ºC), please check the aging and fouling of the grease, and specify the replacement time.
Q: Delivery time
A: Fubao has 2000+ production base, daily output of 1000+ units, standard models within 7 days of delivery.
Q: Reducer selection
A: Fubao provides professional product selection guidance, with higher product matching degree, higher cost performance and higher utilization rate.
Q: Application range of reducer
A: Fubao has a professional research and development team, complete category design, can match any stepping motor, servo motor, more accurate matching.
| Application: | Motor, Machinery, Agricultural Machinery, Packaging Machinery |
|---|---|
| Hardness: | Hardened Tooth Surface |
| Installation: | Horizontal Type |
| Customization: |
Available
| Customized Request |
|---|
.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
|
Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Proper Installation and Alignment of Miter Gearboxes
Installing and aligning a miter gearbox correctly is essential to ensure its optimal performance and longevity. Follow these steps to achieve proper installation and alignment:
- Preparation: Gather all necessary tools and equipment for the installation, including mounting hardware, shims, and alignment tools.
- Mounting Surface: Ensure that the mounting surface is clean, flat, and free from any debris or contaminants that could affect the gearbox’s alignment and operation.
- Alignment Tools: Use precision alignment tools, such as dial indicators or laser alignment systems, to accurately measure and adjust the alignment of the gearbox and its input and output shafts.
- Check for Parallelism: Align the input and output shafts of the gearbox to be parallel to each other and perpendicular to the mounting surface. This step is crucial to prevent misalignment-induced wear and reduce backlash.
- Adjustment: Use shims or other adjustable components to fine-tune the alignment. Make incremental adjustments while continuously checking the alignment with the chosen alignment tools.
- Bearing Loads: Ensure that the bearings supporting the gearbox shafts are properly lubricated and preloaded according to the manufacturer’s recommendations. Proper bearing preload helps maintain alignment and reduces wear.
- Tightening Bolts: Tighten the mounting bolts gradually and evenly to avoid introducing additional misalignment during the installation process.
- Runout and Clearance: Check for any runout or clearance issues during rotation by turning the input shaft. If there is any binding, interference, or abnormal noise, investigate and address the cause before finalizing the installation.
- Final Checks: Double-check the alignment using the alignment tools and ensure that the gearbox operates smoothly without any unusual vibrations, noises, or resistance.
- Documentation: Keep a record of the alignment measurements and adjustments made during the installation process. This documentation can be valuable for future reference and maintenance.
Proper installation and alignment of miter gearboxes help optimize their performance, minimize wear and tear, and contribute to the overall efficiency and reliability of the mechanical system in which they are used.
Miter Gearboxes in Automotive Applications, Especially Steering Systems
Miter gearboxes play a crucial role in automotive applications, particularly in steering systems, where they are utilized to change the direction of motion by 90 degrees. Here’s how miter gearboxes perform in automotive steering systems:
Steering Mechanism: In vehicles, the steering column provides the rotational motion, which needs to be transmitted to the wheels at a right angle for effective steering control. Miter gearboxes are integrated into the steering system to achieve this motion change.
Angular Change: The miter gearboxes take the rotational input from the steering column and transmit it through bevel gears placed at a 90-degree angle. This allows the motion to be directed towards the steering linkage and ultimately the wheels.
Precision and Accuracy: Automotive steering systems require precise and responsive motion control. Miter gearboxes ensure accurate transmission of motion, allowing drivers to have reliable and smooth steering control.
Compact Design: Miter gearboxes have a compact and space-saving design, making them suitable for installation within the limited space of a vehicle’s steering column.
Reduced Backlash: To ensure safety and responsiveness, miter gearboxes are designed to minimize backlash, which is crucial for maintaining accurate control over the vehicle’s direction.
Durability: Automotive applications demand durability and reliability. Miter gearboxes are designed to withstand the conditions and loads experienced in vehicles, ensuring long-lasting performance.
Miter gearboxes contribute to the efficient and effective operation of steering systems in vehicles, providing drivers with the control needed to navigate safely and comfortably.
Significance of the Angle Between Bevel Gears in a Miter Gearbox
The angle between bevel gears in a miter gearbox is of critical significance as it determines the direction of motion transmission and the type of mechanical arrangement that can be achieved.
In a miter gearbox, the angle between the bevel gears is typically set at 90 degrees. This means that the two intersecting shafts will rotate perpendicular to each other, allowing the transmission of motion from one shaft to another at a right angle.
The 90-degree angle between bevel gears is a fundamental feature that enables various applications where changes in motion direction are required within a compact space. This configuration allows for the redirection of rotational energy and torque, making it useful in applications such as changing the orientation of power flow, redirecting motion, and transmitting power around obstacles or corners.
It’s important to note that the angle between bevel gears can be customized to different values, but 90 degrees is the most common configuration in miter gearboxes due to its versatile and practical nature. The precise angle and arrangement of the bevel gears ensure efficient motion transmission while accommodating the specific requirements of the mechanical system in which the miter gearbox is used.
editor by CX 2023-10-12
in Tanger Morocco sales price shop near me near me shop factory supplier Wpa Turbine Worm Gear Reducer Small Iron Case with Motor Gear Wpo Vertical Gearbox 220V manufacturer best Cost Custom Cheap wholesaler
We are looking forward to developing productive enterprise associations with new clientele all around the world in the long term. “We are always serving our buyers with our very best goods.” We will supply greatest companies and high top quality items with all sincerity.
Product Introduce:
WP Series WORM Gear Speed EPTT
WP collection EPTT, worm is produced of 45 # high top quality steel by warmth treatment, and worm wheel is cast with tin bronze. It has excellent put on resistance, eEPTTly in bearing capacity. It is largely appropriate for deceleration EPTT of a variety of mechanical gear this sort of as plastics, metallurgy, EPTTrage, EPT, lifting and transportation, chemical development and so on.
Item Information:
wp collection structure drawing:
| Pace Ratio | 1/10 | 1/15 | one/20 | 1/twenty five | one/thirty | one/forty | one/50 | 1/60 |
| Performance | 77~90% | seventy six~88% | seventy five~eighty four% | seventy two~82% | 68~82% | 64~seventy five% | 62~72% | sixty~seventy one% |
WP Series WORM Gear Velocity EPTT Attributes:
one.Generate effortlessly, vibration, influence and sound are small, deceleration ratio is large, versaEPTTty is wide, and can be employed with a selection of mechanical tools.
2.Massive EPTT ratio can be obtained by single-phase EPTT, and the structure is compact. Most types of EPTTs have EPT self-locking performance. Braking products can be saved for mechanical tools with braking needs.
3.The meshing friction reduction amongst worm tooth and worm EPT tooth surface area is more substantial, so the EPTT performance is reduce than that of EPT, effortless to warmth and high temperature.
four.EPTer needs for lubrication and cooling.
five.Excellent compatibility, worm EPT and worm are manufactured according to national stXiHu (West EPT) Dis.Hu (West EPT) Dis.rds, bearing, oil seal and other stXiHu (West EPT) Dis.Hu (West EPT) Dis.rd areas are employed.
Item advertising:
NMRV worm EPTT AC motor X/B series cycloid planetary EPTT
| solution website link: https://EPTTngsuEPTT.en.made-in-china.com/item/KCnmZXOyeokF/EPTT-Nmrv50-90-Diploma-EPTT-EPTT-Velocity-EPTT-Prices-Worm-EPT-Box-EPT.html |
solution link: https://EPTTngsuEPTT.en.manufactured-in-china.com/item/YNgESCvyGOhb/EPTT-EPT-EPTT-Three-Stage-EPT-EPT-1-1kw-one-5HP-AC-EPT-Y2-Collection-3-Stage-Asynchronous-Electric-EPT.html |
merchandise website link: https://EPTTngsuEPTT.en.created-in-china.com/solution/NyfJTsAonMWb/EPTT-Xwd5-Cycloidal-EPTT-Planetary-EPTT-with-EPT.html |
Our Business:
EPTTngsu EPTT EPT EPTT EPTT, Ltd.
Our firm was founded in 2018. It was launched by a team of youthful people with EPTTrprising spirit. It is deterEPTd to make a great EPT box in one hundred many years. The business is 50-100 folks, with skilled R ampampD, design and style, income team, items promote properly at house and overseas, the market place is largely concentrated overEPTT. Provide customers with customized options. On the foundation of reciprocity and mutual reward, EPT insists on meeting customers’needs with substantial good quality and successful services.
We have professional engineers who can provide you with individualized remedies to meet distinct requirements. EPT can fulfill the requirements of numerous application regions. Silk and EPTTium goods can fulfill the wants of a lot of software fields. They have been effectively applied in meat, seafood and aquatic merchandise processing market, baking industry, cHangEPT market, EPTTrage and dairy merchandise processing industry, fruit and vegetable processing business, pharmaceutical and cosmetics market and battery manufacturing, corrugated paper production, tire production and other generation fields.
EPTT and EPT:
*EPTT: In orEPTTto make sure the integrity of item appearance, we will select cartons, wood pallets and wood pallets in accordance to customer needs.
*Shipping and delivery time: Every EPTT is manufactured and examined in accordance with stringent and mounted methods to make sure that the quality is proper just before leaving the manufacturing facility and supply on time.
*EPT mode: We will decide on the most appropriate method of transportation for our customers in accordance to the weigEPTT and size of the goods. We can also select the method of transportation in accordance to the needs of our customers.
*Obtaining and after-income support: Following receiving the goods, make sure you verify whether they are in very good situation. We will supply buyers with excellent following-revenue provider.
FAQ:
Q1: Are you a buying and selling company or a maker ?
A: We are a company in EPTTngsu Province, EPTT. Our company owns the potential of production, processing, developing and R ampD. We welcome your go to.
Q2: How we pick versions and technical specs?
A: According to the certain particulars of the calls for from the element of enquiry, we will suggest the products’ types on synthesizing the elements of subject of goods utilization, EPTT, torque arm and ratio…
Q3: How is your value? Can you offer you any discount?
A: Our prices are alwaEPTTcompetitive. If the buyer can area a huge get, we absolutely will allow low cost.
This fall: How EPTT ought to I wait around for the feedback following I deliver the enquiry?
A4: We will reply as before long as attainable, 12 hrs at most.
Q5: What is your item guarantee period of time?
A: We have the certifications of ISO9001,CE, SGS.
Q6: What EPTT are your EPTTes currently being utilised?
A: Our EPTTes are widely applied to metallurgical equipment, mining equipment, EPTT gear, foods EPTTry, EPTT gear, tobacco equipment and so on.
We hope to listen to from you. We will sincerely and warmly provide you and advise our greatest products to you, if you any intersted in our items,you should get in touch with us:
