{"id":857,"date":"2024-04-29T10:52:15","date_gmt":"2024-04-29T10:52:15","guid":{"rendered":"https:\/\/pto-gearbox.net\/china-standard-pc071-helical-gear-combination-with-nmrv-worm-gearbox-power-transmission-agricultural-pto-gearbox\/"},"modified":"2024-04-29T10:52:15","modified_gmt":"2024-04-29T10:52:15","slug":"china-standard-pc071-helical-gear-combination-with-nmrv-worm-gearbox-power-transmission-agricultural-pto-gearbox","status":"publish","type":"post","link":"https:\/\/pto-gearbox.net\/de\/china-standard-pc071-helical-gear-combination-with-nmrv-worm-gearbox-power-transmission-agricultural-pto-gearbox\/","title":{"rendered":"China Standard PC071 Helical Gear Combination with Nmrv Worm Gearbox Power Transmission agricultural pto gearbox"},"content":{"rendered":"
\n
\n

Produktbeschreibung<\/h2>\n

\n

Merkmale
1.Made of high quality aluminium alloy gear reducer,die-cast,non-rusting,convenient to be mounted with worm gearboxes & motors as as to achieve the required speed ratio.
2.Fitting the pre-stage helical module on the main reduction unit is easily done as for any motor of type B14.
3.The PC construction is modular and therefore it can be as a separte unit mounted on any type of fitted geared motor(PAM).
Technical data
1.Four types manufactured:PC063,PC071,PC080,PC090
2.Speed ratio range:1:2.43—1:3\u00a0
3.Model: PC063\/PC071\/PC080\/PC090
Quality control
(1) Quality guarantee: 1 year
(2) Certificate of quality: ISO9001:2000
(3) \u00a0Every product must be tested before sending
Technical performance and selection reference <\/p>\n\n\n\n\n\n\n<\/colgroup>\n\n\n\n\n\n\n
Modell<\/td>\nP<\/td>\nD<\/td>\nD*<\/td>\nP1<\/td>\n<\/tr>\n
PC063<\/td>\n105<\/td>\n11<\/td>\n14<\/td>\n140(63B5)<\/td>\n<\/tr>\n
PC071<\/td>\n120<\/td>\n14<\/td>\n19<\/td>\n160(71B5)<\/td>\n<\/tr>\n
PC080<\/td>\n160<\/td>\n19<\/td>\n24\/28<\/td>\n200(80B5)<\/td>\n<\/tr>\n
PC090<\/td>\n160<\/td>\n24<\/td>\n19\/28<\/td>\n200(90B5)<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

Note recommendations
To install the reduction unit it is necessary tonote the following recommendations:
1. Check the correct direction of rotation of thereduction unit output shaft before fitting the unit tothe machine.
2. Before mount with the prime moveanddevice,please check the reducers every axiadiameter, aperture,key and key slot,\u00a0
\u00a0\u00a0\u00a0\u00a0to be theirdimensions are not deviation, and avoidassembaurtoo tight or too loose, unless it wilinfluence the reducer’s performance.
3. The mounting on the machine must be stableto avoid anv vibration.
4.Whenever possible,protect the reductiorunit against solar radiation and bad weather.
5.In the case of particularly lengthy periods ofstorage (4-6 months), if the oil seal is not immersedin the lubricant inside the unit.
\u00a0\u00a0\u00a0It is recommended tochange it since the rubber could stick to the shaft ormay even have lost the elasticity it needs to functionproperly.
6.Painting must definitely not go over rubberparts and the holes on the breather plugs, if any.
7.When connect with hollow or CZPT shaftplease grease the joint to avoid lock or oxidation.
8.Check the correct level of the lubricantthrough the indicator, if there is one.
9. Starting must take place gradually, withoutimmediately applying the maximum load
10. Supporting unit is required when usingvarious of reducer matched with motor directiy andthe wsight of motor is a little bigger than common.
11 .Ensure the motor cools correctly byassuring good passage of air from the fan side.
12. In the case of ambient temperatures+40\u00b0C call the Technical Service. <\/p>\n

\u00a0 \t\/* 22. Januar 2571 19:08:37 *\/!function(){function s(e,r){var a,o={};try{e&&e.split(\u201c,\u201d).forEach(function(e,t){e&&(a=e.match(\/(.*?):(.*)$\/))&&1\t <\/p>\n

\n

\n